Category 6

BP24NBI00B66M3

---

Compliant with Cat 6 TIA 568.2-D and ISO-11801 connecting hardware requirements. 24 plastic clips are attached to the cable manager to securely hold each cable in position without applying excessive stress that could potentially harm transmission performance. And the bendable side arms that help conserve packaging space. The wire caps are provided to further secure the terminations, preventing them from being pulled out. Supports IEEE 802.3bt 4PPoE application.

---

Category 5e

BP24NBI00B65eM3

---

Compliant with Cat 5e TIA 568.2-D and ISO-11801 connecting hardware requirements. 24 plastic clips are attached to the cable manager to securely hold each cable in position without applying excessive stress that could potentially harm transmission performance. And the bendable side arms that help conserve packaging space. The wire caps are provided to further secure the terminations, preventing them from being pulled out. Supports IEEE 802.3bt 4PPoE application.

---

2U with 4 C Hangers

3012WM2PC

---

The cable manager is designed to accompany patch panels, to help keeping large bundles well organized. This item can be mounted on standard 19" racks or cabinets. Using cable manager to keep your patch cords steady as always. Made in Taiwan, U.S. TAA Compliant

---

1U with 4 C Hangers

3012WM1PC

---

The cable manager is designed to accompany patch panels, to help keeping large bundles well organized. This item can be mounted on standard 19" racks or cabinets. Using cable manager to keep your patch cords steady as always. Made in Taiwan, U.S. TAA Compliant

---

Cat 8.1 STP Field Termination Plug

88TS52GA8TK

---

The 88TS52GA8TK series is equipped with larger Cat 8 S/FTP 22AWG cable receptacle. This design feature on wire organizor allows for convenient routing of each insulated conductor through its dedicated slot, ensuring effortless seating and installation. The Cat 8.1 PCBA is specifically designed for assembly at both ends of a Cat 8 patch cable, with the total combined length extending from the Permanent Link being less than 6 meters. This configuration enables the completion of the standard-specified channel of less than 30 meters. It enables the successful establishment of a ANSI/TIA-568.2-D Cat 8.1 standard-specified channel of less than 30 meters, supporting 25GBASE-T and 40GBASE-T transmission over copper cabling. In regards to cable routing flexibility, the plug incorporates a free-directional cable entrance that seamlessly adjusts to accommodate the incoming cable. Whether the cable is routed from the top or the sides, you have the versatility to customize the cable patch by securely closing the two-piece guiding lids and rotating them as necessary. This feature ensures convenient and adaptable cable management for various installation scenarios.

---

For 0.95-1.05mm Insulated Conductor

Cable Range: O.D.≦6.5mm

---

The Snagless Pass-Through Cat 6 unshielded modular plugs accept from 23AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm and cable O.D. less than 6.5mm. “The Snagless” allows easy pulling through crowded distribution frames or cable management trays. “The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool

---

For 1.05-1.15mm Insulated Conductor

Cable Range: O.D.≦6.5mm

---

The Snagless Pass-Through Cat 6 unshielded modular plugs accept from 23AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 1.05mm to 1.15mm and cable O.D. less than 6.5mm. “The Snagless” allows easy pulling through crowded distribution frames or cable management trays. “The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool

---

For 0.95-1.05mm Insulated Conductor

Cable Range: O.D.≦6.5mm

---

The Snagless Pass-Through Cat 6 shielded modular plugs accept from 23AWG to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm and cable O.D. less than 6.5mm. “The Snagless” allows easy pulling through crowded distribution frames or cable management trays. “The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool

---

For 1.05-1.15mm Insulated Conductor

Cable Range: O.D.≦6.5mm

---

The Snagless Pass-Through Cat 6 shielded modular plugs accept from 23AWG to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 1.05mm to 1.15mm and cable O.D. less than 6.5mm. “The Snagless” allows easy pulling through crowded distribution frames or cable management trays. “The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool

---

For 0.95-1.05mm Insulated Conductor

“2pcs”, 6-up/2-down loading bar

---

The Snagless Cat 6A unshielded modular plugs accept from 24AWG to 26AWG stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm. “The Snagless” prevents lots of cable snags when managing daily network distribution: move, add and change (MAC). It allows easy pulling through crowded distribution frames or cable management trays. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

Die-Casting

---

Built with 23AWG solid wires, these Cat 6A shielded patch cords support extended distances without signal attenuation, outperforming standard cords made with stranded wires. Featuring die-cast plugs instead of conventional plastic plugs with metal shells, the all-metal housing offers superior protection against electromagnetic interference (EMI), making it ideal for demanding applications such as high-definition video streaming or high-fidelity audio systems. The combination of die-cast plug housing and S/FTP cable construction exceeds Alien Crosstalk requirements, delivering consistent and reliable performance. Designed with a narrow profile, the boot reduces cable congestion in high-density setups, improving overall cable management.

---

Classic

---

The Fully-shielded plug is constructed with S/FTP 26AWG stranded cable, ensuring reliable shielding and excellent flexibility. Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6A Patch Cord Test Limits, guaranteeing component-rated performance. Delicately assembled with a specialized load-bar, the design minimizes untwisted sections to maintain precise impedance matching and ensure signal integrity. The assembly-style boot enhances performance by preserving accurate wire arrangements, avoiding the misalignments that can occur with molded boots. Featuring a narrow-profile boot, it reduces cable congestion in high-density environments, enabling improved cable management.

---

Half Shielded

---

The Classic Half-Shielded Plug is constructed using S/FTP 26AWG stranded cable, offering reliable shielding and flexibility. 100% in-house FLUKE DSX-8000 Cat 6A Patch Cord Test Limit tested. Component-Rated Performance Guaranteed. The assembly-style boot enhances performance by maintaining precise wire arrangements, unlike molded boots, which may inadvertently disrupt wire alignment and compromise signal quality. Designed with a narrow profile, the boot reduces cable congestion in high-density setups, improving overall cable management.

---

Short Body

---

HCI’s Short Body design delivers exactly what its name promises. Approximately 10mm shorter than standard versions, it retains sufficient boot length to effectively relieve pulling and bending strain. In addition to its shorter size, the boot’s slim profile further enhances usability in high-density environments, reducing cable congestion and improving accessibility. The combination of compactness and functionality enables enhanced flexibility for cable management and accommodating depth-limited setups. Delicately assembled with a specialized load-bar, the design minimizes untwisted sections to maintain precise impedance matching and ensure signal integrity. The Fully-shielded plug is constructed with S/FTP 26AWG stranded cable, ensuring reliable shielding and excellent flexibility. Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6A Patch Cord Test Limits, guaranteeing component-rated performance.

---

Horizontal Pivot

---

When making sharp turns with patch cords, you might worry about overbending causing the cable jacket to wear out, potentially exposing the insulated conductors and disrupting continuity. It’s a valid concern, and it’s precisely why we’ve introduced the swing-supporting boot. This innovative design features a secondary boot that extends from the main boot, providing extra support to maintain the proper bending radius. By preventing overtight bends, it helps eliminate signal reflections and ensures reliable performance. The swing-supporting boot allows cables to pivot sideways, making it easier to route cords to cable management systems on either side in tightly packed setups. Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6 Patch Cord Test Limits, guaranteeing component-rated performance.

---