For 1.05-1.15mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Snagless Pass-Through Cat 6 unshielded modular plugs accept from 23AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 1.05mm to 1.15mm and cable O.D. less than 6.5mm.
“The Snagless” allows easy pulling through crowded distribution frames or cable management trays.
“The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting.
It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once!
- UL Listed, TIA-1096 and IEC 60603-7 compliant
- PC UL94V-2 rated plug housing, 50u” gold plated contact blades
- Supports PoE type 4 (PoE++) application
- Must work with 007A8502 Series Crimping Tool
88U5122S1D52
Cable Adaptability | ||
Insulated Conductor diameter range | Maximum Cable O.D. | Wire Gauge |
(1.05~1.15mm), <1.20mm | 6.5mm | 23 to 26AWG |
Transmission Concern | ||
Pieces | Load Bar | Guide |
1pc | N/A | N/A |
- Material
Dielectric Withstanding Voltage
>1000 VAC
Insulation Resistance
>500 MΩ
Contact Resistance
<20mΩ
Operation Temperature
-10℃ to 60℃
Storage Temperature
-40℃ to 70℃
Durability
> 1000 mating cycles
EU Directive 2002/95/EC
RoHS Compliant
Safety Listing
RU Listed
- Dimensions
- Related Products
Crimping Tool for Snagless Thru Plugs
Works with HCI Snagless Pass-Through Series
Crimp and cut HCI Snagless Pass-Through Plug Series (UTP plug: 88U51220AD52, 88U5122S1D52; STP plug: 88S51440AD52, 88S51430AD52) with this custom-made 007A8502 Plug Crimping Tool. Comes with dual cavity ground crimp to wrap STP plug's ground collar onto cable.The horizontal crimping design gives a relatively flat and consistent force to minimize uneven pressure or distortion for consistent and high-quality termination with its stable and straightforward crimping motion.
For Snagless Plug
Regular
When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease.The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result.The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient.The transparent housing saves you from matching the colors of cables. A single boot fits all.
Snagless Boot (Embedded Type)
Short Body, 4.7φ and 6.5φ for Options
When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result.The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient.Comparing to regular snagless boot P/N. SR511E02, this short snagless boot further enables cable-bending in a relatively narrower space.The transparent housing saves you from matching the colors of cables. One single boot fits all.
- Files Download
