Plug includes Boot w/Icon + Cable SR
Plug + φ6.7mm Boot + Boot Icon + Cable SR
Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm.
3-piece design.
The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit."
- UL Listed, TIA-1096 and IEC 60603-7 compliant
- PC UL94V-0 rated plug housing, 50u” gold plated contact blades
- Supports PoE type 4 (PoE++) application
88S201KS2B50TCx
Boot - SR201K10 is designed to precisely fit the shielded plug w/hook - 88S201KS1B50.
The boot is constructed with several locking holes that aid in positioning the locking protrudes located on the shielded plug w/hook - 88S201KS1B50.The boot is made of high-impact PC UL94V-0 material in order to firmly secure the wire-termination in place. The boot accepts shielded cables with a maximum cable O.D. up to 6.7mm. We offer Black and White for color options. Alternatively, you may skip stocking each color and just select the transparent color.
Boot Icon - SR201K20 is provided. Assign any given color for managing port identification on your network. Color options: Red, Orange, Yellow, Green, Blue, Purple, Black, Gray and Light Green
The Extended Strain Relief-SR201K3H is a smart choice for keeping the cable bending radius within a suitable angle range in order not to impact the transmission performance. We are well aware that an impedance problem and signal reflections result from too acute a bending radius. So, please always add a Cable SR when the patch cord is used in a relatively narrow space where sharp turn could likely occur.
Cable Adaptability | ||
Insulated Conductor diameter range | Cable Range | Wire Gauge |
(0.9~1.0mm) 1.1mm | 5.5mm to 6.7mm | 24 to 26AWG |
Transmission Concern | ||
Pieces | Load Bar | Guide |
3pcs | 1-row load bar | windmill guide |
- Material
Plug
Dielectric Withstanding Voltage
>1000 VAC
Insulation Resistance
>500 MΩ
Contact Resistance
<20mΩ
Operation Temperature
-10℃ to 60℃
Storage Temperature
-40℃ to 70℃
Durability
> 1000 mating cycles
EU Directive 2002/95/EC
RoHS Compliant
Safety Listing
RU Listed
Boot
Material
Up to 6.7mm Cable O.D.
Material
PC UL94V-0
Color Options
Black, White and Transparent
Storage Temperature
-40℃ to 70℃
Boot Icon
Material
PBT UL94V-0
Color Options
Red, Orange, Yellow, Green, Blue, Purple, Black, Gray and Light Green
Storage Temperature
-40℃ to 70℃
Cable SR
Cable Adaptability
Up to 6.7mm Cable O.D.
Material
PVC 35% UL94 HB
Color Options
Transparent Red, Transparent Orange, Transparent Yellow, Transparent Green, Transparent Blue, Transparent Purple, Transparent Black, Transparent Gray and Transparent
Storage Temperature
-40℃ to 70℃
- Dimensions
- Related Products
For 0.90-1.00mm Insulated Conductor
“3pcs”, loading bar + windmill guide
Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm.3-piece design. The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit."- UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-0 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
Plug includes Boot w/Icon
Plug + φ6.7mm Boot + Boot Icon
Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm.3-piece design. The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit."- UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-0 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
- Files Download
Drawings-88S201KS2B50TCx
Standard Cat 6A Shielded Modular Plug includes Boot with Boot Icon + Cable SR Drawings