Single-Gang / Dual-Gang Faceplate with Label

2013AK Series

---

2013AK Series Single-gang & Dual-gang faceplates are ideal for the installation of keystone jacks, data, voice and A/V connectors, available in 1~12 ports. Made in Taiwan, U.S. TAA Compliant

---

Single-Gang Flush Faceplate

2013AQ Series

---

2013AQ Series Single-gang flush faceplates are ideal for the installation of keystone jacks, data, voice and A/V connectors, available in 1~6 ports. Made in Taiwan, U.S. TAA Compliant

---

Single-Gang / Dual-Gang /Triple-Gang Decorator Faceplate

2013AD Series

---

2013AD Series decorator faceplates are ideal for the installation of keystone jacks, data, voice and A/V connectors. They are designed to use with mounting frames. It's ideal for small office, home office or residential environment.Insert the units into plastic inserts before snap in the faceplates.

---

Decorator Mounting Strap

2013ADS Series

---

2013ADS Series decorator mounting straps are ideal for the installation of keystone jacks, data, voice and A/V connectors. They are designed for use with mounting frames. it's ideal for small office, home office or residential environment. Insert the units into plastic inserts before snap in the faceplates.

---

SIP Type Single-Gang Furniture Plate with Label

2013AK Series

---

2013AK Series Single-gang plates are ideal for the installation of keystone jacks, data, voice and A/V connectors, which available in 2- and 4-port.

---

Angled Faceplate with Label & Door

B5806 / B5815 Series

---

B5806 / B5815 Series Single-gang faceplates with shutters are ideal for the installation of keystone jacks, data, voice and A/V connectors, available in 1~4 ports.

---

Single-Gang Faceplate with Shutter

B44F Series

---

B44F Series Single-gang faceplates with shutters are ideal for the installation of keystone jacks, data, voice and A/V connectors, available in 1~4 ports.

---

Single-Gang Faceplate with Shutter

2013AF Series

---

2013AF Series Single-gang faceplates with shutters are ideal for the installation of keystone jacks, data, voice and A/V connectors, available in 1~2 ports.

---

Single-Gang / Dual-Gang / Triple-Gang Faceplate

B60 Series

---

B60 Series faceplates are ideal for the installation of keystone jacks, data, voice and A/V connectors.

---

Half-Gang / Single-Gang Module with Shutter

SIP22N Series

---

SIP22N Series faceplates with shutters are ideal for the installation of keystone jacks, data, voice and A/V connectors.

---

A/V Insert

3020B Series

---

The A/V patch panels complement A/V adapter inserts and offer a flexible patching solution. The A/V adapter inserts are ordered separately and quickly snap into blank patch panels. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises.

---

Category 6

SP24MHQ6

---

0.5U 24-Port Unshielded Keystone jack snap-in type patch panel complements keystone jacks and offer a flexible patching solution. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises. Made in Taiwan, U.S. TAA Compliant

---

Category 5e

SP24MHQ5e

---

0.5U 24-Port Unshielded Keystone jack snap-in type patch panel complements keystone jacks and offer a flexible patching solution. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises. Made in Taiwan, U.S. TAA Compliant

---

Multimedia Panel

SP24VM

---

1U 24-Port Unshielded Keystone jack snap-in type multimedia panel (Empty / Unloaded Patch Panel) complements keystone jacks and offer a flexible patching solution. The keystone jacks are ordered separately and quickly snap into blank patch panels. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises. Made in Taiwan, U.S. TAA Compliant

---

Multimedia Panel

SP24N5M

---

1U 24-Port shielded snap-in type multimedia panel (Empty / Unloaded Patch Panel) complements keystone jacks and offer a flexible patching solution. The keystone jacks are ordered separately and quickly snap into blank patch panels. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises. Made in Taiwan, U.S. TAA Compliant

---

Angled Snap-In Type Discrete Panel

SP24AHS

---

1U 24-Port Shielded Angled Snap-In Type Discrete Panel (Empty / Unloaded Patch Panel) complements keystone jacks and offer a flexible patching solution. The keystone jacks are ordered separately and quickly snap into blank patch panels. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises.

---

For 0.90-1.00mm Insulated Conductor

Cable Range: O.D.≦6.5mm

---

The Pass-Through Cat 6A unshielded modular plugs accept from 24AWG to 26AWG stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. Only a very short untwisted length is presented while the cable is fully inserted into the taper, which is the secret to Cat 6A compliance. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

For 1.30-1.40mm Insulated Conductor

Cable Range: O.D.≦7.5mm

---

The Pass-Through Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.30mm to 1.40mm. The Pass-Through plug gives you the convenience of threading the wires through the loading bar. The “1357-up/2468-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. Simply insert the bar all the way till it reaches the narrow gate and cut all wires afterward. Only a very short untwisted length is presented with no room for kink and slack. The extremely short stripped length is the secret to Cat 6A compliance. The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool

---

RJ-45

RJ-45 to RJ-45, C6

---

Our Cat 6 patch cords are specifically designed to support gigabit Ethernet while maintaining an IP-68 waterproof rating, making them ideal for use in harsh environments. These patch cords are available in a variety of standard lengths, including 1, 2, 3, and 5 meters, providing flexibility for different installation needs. A protective cap is securely attached by a chain, ensuring it stays in place and remains undamaged when not in use.

---

BNC

BNC to BNC

---

The BNC coupler offers waterproof protection, making it suitable for military applications and a variety of radio frequency electronic devices. It connects BNC patch cords to support the BNC interface, which was used in early computer networking systems like the IBM PC Network and 10BASE-2, while providing dependable IP-68 rated protection in harsh or outdoor environments. Equipped with a protective cap attached by a chain, the coupler ensures the internal components remain shielded from tough conditions when not in use, enhancing its durability.

---

Field Assembly

Field Assembly Kit

---

Our Field Assembly Kit is designed to house field-assembled RJ45 or M12 plugs, enabling installers to manually create plugs for an IP-68 connection with waterproof female RJ45 or M12 jacks on job sites. This kit is particularly useful when molded house-assembled patch cords are not available. Often, you need to assess your surroundings, determine the appropriate cable length, and then create your own patch cords. Essentially, it serves as a versatile DIY waterproof kit. The cable entrance accommodates diameters ranging from 5mm to 10mm, covering nearly all industrial network cable sizes available on the market.

---

Horizontal Pivot

---

When making sharp turns with patch cords, you might worry about overbending causing the cable jacket to wear out, potentially exposing the insulated conductors and disrupting continuity. It’s a valid concern, and it’s precisely why we’ve introduced the swing-supporting boot. This innovative design features a secondary boot that extends from the main boot, providing extra support to maintain the proper bending radius. By preventing overtight bends, it helps eliminate signal reflections and ensures reliable performance. The swing-supporting boot allows cables to pivot sideways, making it easier to route cords to cable management systems on either side in tightly packed setups. Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6 Patch Cord Test Limits, guaranteeing component-rated performance.

---

Vertical Pivot

---

When making sharp turns with patch cords, you might worry about overbending causing the cable jacket to wear out, potentially exposing the insulated conductors and disrupting continuity. It’s a valid concern, and it’s precisely why we’ve introduced the swing-supporting boot. The second-stage supporting boot extends from the first, providing extra support to ensure the cable maintains the correct bending radius, preventing tight bends that could lead to signal reflection. The supporting boots swing vertically, allowing each cord to connect smoothly to either the upper or lower patch panels or network equipment. Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6 Patch Cord Test Limits, guaranteeing component-rated performance.

---