Vertical Pivot
When making sharp turns with patch cords, you might worry about overbending causing the cable jacket to wear out, potentially exposing the insulated conductors and disrupting continuity. It’s a valid concern, and it’s precisely why we’ve introduced the swing-supporting boot.
The second-stage supporting boot extends from the first, providing extra support to ensure the cable maintains the correct bending radius, preventing tight bends that could lead to signal reflection. The supporting boots swing vertically, allowing each cord to connect smoothly to either the upper or lower patch panels or network equipment.
Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6 Patch Cord Test Limits, guaranteeing component-rated performance.
PU650B203
- Exceeds all ANSI/TIA-568.2-D and ISO 11801 Category 6 Patch Cord Limit (Component-Rated)
- T568-B Wiring (T568-A on request)
Order Information:
| PU650B203xyyyzz | |
| x=Jacket Material | A=PVC, C=CM PVC, L=LSZH |
| yyy=Length | 50C=50CM, 01M=1meter, 03F=3ft… |
| zz=Color | BK=Black, GY=Gray, RD=Red, WH=White, YL=Yellow, BL=Blue, GN=Green, PP=Purple, OR=Orange |
- Material
Plug
PC UL94V-2 (PC UL94V-0 upon request)
Plug Blade
Phosphor Bronze, 50u” Gold at contact area, Nickel Undercoat
Cable Used
U/UTP 28AWG Stranded
Cable O.D.
3.9±0.2 mm
Jacket Classification
PVC CM-Rated (LSZH on request)
Boot
PVC