For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Pass-Through Cat 6 unshielded modular plugs accept 24AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm.
The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time.
- UL Listed, TIA-1096 and IEC 60603-7 compliant
- PC UL94V-2 rated plug housing, 50u” gold plated contact blades
- Supports PoE type 4 (PoE++) application
- Must work with 007A8401 Series Crimping Tool
88U400G1LC52
|
Cable Adaptability |
||
|
Insulated Conductor diameter range |
Maximum Cable O.D. |
Wire Gauge |
|
(0.91~1.0mm) 1.0mm |
6.5mm |
24 to 26AWG |
|
Transmission Concern |
||
|
Pieces |
Load Bar |
Guide |
|
1pc |
N/A |
N/A |
- Material
-
Dielectric Withstanding Voltage
>1000 VAC
Insulation Resistance
>500 MΩ
Contact Resistance
<20mΩ
Operation Temperature
-10℃ to 60℃
Storage Temperature
-40℃ to 70℃
Durability
> 1000 mating cycles
EU Directive 2002/95/EC
RoHS Compliant
Safety Listing
RU Listed
- Dimensions
-
- Related Products
-
-
Crimping Tool for Pass-Through Plugs
Works with HCI Pass-Through Plug Series
The 007A8401 Series Crimping Tool is custom-made for HCI 88U400G, 88S400E, 88U403E and 88S403C Plug Series. Just thread the wires through the end wall of the plug and cut them afterward. The tool terminates the contact blades with insulated conductors and cut off the excess wires flush at the same time without damaging the plug body. The tool is suitable for insulated conductors ranging from 0.85mm to 1.05mm solid and stranded wires. The cutting die offers more than 5000 times termination cycles. Two spare blades are included for easy replacement. It is made of carbon steel material with lightweight aluminum-alloyed handle that weighs 420 grams only. Easy to carry around.
-
For C6/C6A Plug
Φ4.0mm to 6.5mm
The embedded boot provides convenience when being used in fully populated blade switches or high density patch panels. The slender body sits flush with the RJ-45 plug. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 4.0mm/5.0mm 5.5mm/6.0mm/6.5mm cable O.D. for options
-
- Files Download
-
-
