For 1.35-1.45mm Insulated Conductor
“2pcs”, 4-up/4-down loading bar
The “Big Conductor w/Hook” Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.35mm to 1.45mm and cable O.D. less than 8.0mm. This could be the plug that accommodates the largest foamed wires on the market so far!
2-piece design.
The “4-up/4-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. It artfully enlarges the spacing between “pin 3 to pin 4” and “pin 5 to pin 6”. In this way, the noise between the blue and green pair can be mitigated so as to easily pass “Cat 6A Patch Cord Test Limit”.
The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires.
- UL Listed, TIA-1096 and IEC 60603-7 compliant
- PC UL94V-2 rated plug housing, 50u” gold plated contact blades
- Supports PoE type 4 (PoE++) application
88S5079S3D52
Cable Adaptability | ||
Insulated Conductor diameter range | Maximum Cable O.D. | Wire Gauge |
(1.35~1.45mm), <1.5mm | 8.0mm | 23 to 26AWG |
Transmission Concern | ||
Pieces | Load Bar | Guide |
2pcs | 4-up/4-down load bar | N/A |
- Material
Dielectric Withstanding Voltage
>1000 VAC
Insulation Resistance
>500 MΩ
Contact Resistance
<20mΩ
Operation Temperature
-10℃ to 60℃
Storage Temperature
-40℃ to 70℃
Durability
> 1000 mating cycles
EU Directive 2002/95/EC
RoHS Compliant
Safety Listing
RU Listed
- Dimensions
- Related Products
For 23AWG S/FTP
Φ7.0mm to 8.0mm
The outer coated boots are made for relieving the cable strain when using large O.D. cable such as Cat 6A S/FTP 23AWG with a diameter of approximately 7.5+-0.5mm. The boot is constructed of PVC which gives a lot of friction between cable and plug. The flexible cone tail guards against improper bending radius that might cause downtime of networks.
- Files Download