1 Port Combinable Box

SMB1B Series

---

SMB1B Series combinable box provides flexible surface mounting of 1-port. It future left and right thumb release allow the snap-on cover to be easily removed. The unit comes with mounting screws and double-sided adhesive for quick installation.

---

1~12 Port Surface Box

SMB Series

---

The surface box provides flexible surface mounting of 1-, 2-, 4- or 12-port and accommodate Keystone Jacks without shutter. The unit comes with mounting screws and double-sided adhesive for quick installation. Additional magnets are available upon request.

---

1~6 Port Office Box

300A Series

---

The office box provides flexible surface mounting of 1-, 2-, 4-, pr 6-port and can be iconified and labeled for easy port identification. The unit comes with mounting screws and double-sided adhesive tape for quick installation. Optional shutter door for protect from dust and other contaminants. Additional magnets are available upon request.

---

Single-Gang / Dual Gang Back Box

MB11 Series

---

MB11 series back box is designed to mount into a wall, floor or other flat surface. Convenient “molded-in” rear and side cable entries easily accommodate coax or optical fiber. Unit includes screws and double-sided tape for mounting, rubber-door and cable tie. Made in Taiwan, U.S. TAA Compliant

---

1-Port Shielded Mounting Bezel

DN11 Series

---

1-Port Shielded Mounting Bezel Suitable for multiple Shielded and Unshielded Keystone jack Keystone Type connectors of USB/HDMI/TRS3.5-Coupler and RJ-45 Keystone Jack. 1-Port Shielded Mounting Bezel Allows to Screw Mounted installation in any places including Screw Type Panel and Wall. Made in Taiwan, U.S. TAA Compliant

---

Single-Gang / Dual Gang Back Box

MB14 / MB15 Series

---

MB14 / MB15 series back box is designed to mount into a wall, floor or other flat surface. Convenient “molded-in” rear and side cable entries easily accommodate coax or optical fiber. Unit includes screws and double-sided tape for mounting, rubber-door and cable tie.

---

Single-Gang Back Box

625MB12 Series

---

625MB12 series back box is designed to mount into a wall, floor or other flat surface. Convenient “molded-in” rear and side cable entries easily accommodate coax or optical fiber. Unit includes screws and double-sided tape for mounting, rubber-door and cable tie.

---

Screw Terminal Type 90° USB 2.0 Coupler

310USB1N

---

USB-Screw Terminal extender module provide a economical and perfect solution for boosting up. With one low cost Cat 5e or Cat 6 cable, users can readily extend connecting computer peripherals to a computer workstation. The screw design is also convenient to integrate extender module with LAN cable without any punch down tool, and use it easily after simply snapping it in the faceplates. Made in Taiwan, U.S. TAA Compliant

---

Category 6A

BP24GKAFS6A

---

Hand screws are included for convenient fastening of the case. The L-type panel is constructed with a heavy-duty mechanism, allowing it to be securely placed anywhere, such as on a desk, for wire termination purposes. The intuitive one-row IDC design accelerates wire termination, saving time during installation. Accepts both 110 and LSA Krone Tool. Grounding clips are positioned directly at the rear of the 4-pair termination. This setup allows for the drain wire and shielded braid to be neatly rolled over the cable sheath, ensuring a proper screening length. The shielded case completely envelops the termination in a 360-degree manner, minimizing leakage and reducing the potential for common mode noises to interfere with signal balancing.

---

Category 6

BP24GKAFS6

---

Hand screws are included for convenient fastening of the case. The L-type panel is constructed with a heavy-duty mechanism, allowing it to be securely placed anywhere, such as on a desk, for wire termination purposes. The intuitive one-row IDC design accelerates wire termination, saving time during installation. Accepts both 110 and LSA Krone Tool. Grounding clips are positioned directly at the rear of the 4-pair termination. This setup allows for the drain wire and shielded braid to be neatly rolled over the cable sheath, ensuring a proper screening length. The shielded case completely envelops the termination in a 360-degree manner, minimizing leakage and reducing the potential for common mode noises to interfere with signal balancing.

---

Category 5e

BP24GKAFS5e

---

Hand screws are included for convenient fastening of the case. The L-type panel is constructed with a heavy-duty mechanism, allowing it to be securely placed anywhere, such as on a desk, for wire termination purposes. The intuitive one-row IDC design accelerates wire termination, saving time during installation. Accepts both 110 and LSA Krone Tool. Grounding clips are positioned directly at the rear of the 4-pair termination. This setup allows for the drain wire and shielded braid to be neatly rolled over the cable sheath, ensuring a proper screening length. The shielded case completely envelops the termination in a 360-degree manner, minimizing leakage and reducing the potential for common mode noises to interfere with signal balancing.

---

Bayonet Mounting

88TS52G36ATK

---

The 88TS52G36ATK is the second variant of the 88TS52G product family, offering a unique securing methodology known as bayonet mounting. This innovative design provides an effortless installation process compared to conventional screw-type connections. The advantages of bayonet mounting become particularly evident when dealing with large-scale installations involving hundreds of nodes in a single day. With the spring-loaded mechanism, the plug ensures a secure and locked connection as the cable gland is rotated at the rear, eliminating any concerns about potential loosening of screw fixtures. With its shorter body length, the plug is specifically designed to accommodate various scenarios encountered when making connections between the incoming cable and end devices like Wi-Fi APs. This compact design offers flexibility and unrestricted connectivity, even in tight spaces or challenging installation environments, effectively overcoming any space limitations. The 88TS52G36ATK plug delivers outstanding performance, surpassing the required standards with a significant margin in both Cat 6A Modular Plug Terminated Link (MPTL) and the more stringent Cat 6A Patch Cord Test Limit. Its exceptional results highlight its reliability and capability to exceed industry requirements, ensuring reliable and high-performance connectivity in various network applications. The plug has been meticulously designed to achieve full compatibility with the IEEE 802.3bt 4PPoE (Power over Ethernet) requirement. It possesses the ability to efficiently deliver 90W of power from the Power Sourcing Equipment (PSE) to the Powered Device (PD) with received power 71.3W, meeting the power delivery standards mandated by PoE Type 4.

---

Cat 6A STP Field Termination Plug

88TS52G2A6ATK

---

The 88TS52G2A6ATK series incorporates a two-row prewired mechanism, allowing for the convenient routing of each pair through its designated slot and effortless seating. The screw-type rotatable cable gland is specifically designed to accommodate various cable sizes, ranging from 23AWG solid to 26AWG stranded cables, irrespective of whether they are S/FTP, F/FTP, F/UTP, or U/FTP shielded types. Depending on the diameter of the cable, you have the flexibility to adjust the tightness of the attached grounding by screwing it tightly or loosely according to your requirements. The plug features a free-directional cable entrance that can easily adapt to the incoming cable. Regardless of whether the cable is routed from the top or the sides, you have the flexibility to adjust the cable patch by closing the two-piece guiding lids and rotating them as needed. The plug is compliant with the rigorous standards of IEC 60512-99-002, which guarantee its durability even during numerous mating cycles under electrical load. This compliance aligns with the compatibility requirements set forth by IEEE 802.3bt. The shielded angled type plug is designed to support 4PPoE Class 8 power levels, enabling the transmission of up to 90W of power from the Power Sourcing Equipment (PSE) to the Powered Device (PD) over four twisted pairs. Moreover, the HCI 88TK series plugs are compliant with IEC 60512-99-002 standards, ensuring durability during mating cycles under electrical load, in accordance with the compatibility requirements of IEEE 802.3bt.

---

1-Port

---

The waterproof faceplate, built from sturdy SUS430 stainless steel, is designed to deliver exceptional durability for industrial applications. Offering a minimum IP-44 rating, it guards against dust and water spray, while also standing up to oil exposure in areas with heavy machinery. Its rear gasket provides an added layer of protection, keeping out contaminants and ensuring reliable performance even in tough environments. The 83.1mm screw hole spacing is compatible with most American wall brackets. Its outer dimensions, 70.6x115mm, ensure coverage of traditional wall cutouts, even if they are rough or uneven.

---

2-Port

---

The waterproof faceplate, made from premium SUS430 stainless steel, is built to withstand tough industrial environments. With its IP-44 rating, it offers dependable protection against dust and water spray, while also resisting oil exposure typically found around heavy machinery. A durable rear gasket provides an extra layer of protection, sealing out contaminants to ensure the faceplate’s longevity, even in the most demanding settings. The 83.1mm screw hole spacing is compatible with most American wall brackets. Its outer dimensions, 70.6x115mm, ensure coverage of traditional wall cutouts, even if they are rough or uneven.

---

4-Port

---

The waterproof faceplate, made from high-quality SUS430 stainless steel, offers a robust and durable solution for industrial-grade applications. With a minimum IP-44 rating, it provides reliable protection against dust and water spray, while also resisting oil exposure commonly found in environments with heavy machinery. Equipped with a rear gasket, the faceplate effectively seals out contaminants, ensuring long-term durability and performance even in challenging conditions. The 83.1mm screw hole spacing is compatible with most American wall brackets. Its outer dimensions, 116x114.6mm, ensure coverage of traditional wall cutouts, even if they are rough or uneven.

---

Mount Box (25.2φ)

For RJ45 (IECA/IECA)

---

The Mounting Box IEMA0 is designed for seamless IP-68 rated connections between jacks and cords, featuring two knockout holes on the cover. If you only need one port, you can easily leave the second hole intact. Each knockout hole has a 25.2mm diameter, perfectly fitting our RJ45 Keystone Jacks (IEKA0) or Couplers (IECA). The side panel offers additional flexibility with two smaller holes for M16 cable glands, commonly found in stores, and one larger hole for an M32 conduit gland. You can remove the knockouts based on your specific requirements, making installation straightforward.

---

Mount Box (17.0φ)

For M12 (IECB)

---

The Mounting Box IEMA1 is specifically designed for M12 to RJ45 interface conversions, featuring two knockout holes on the cover. If only one port is needed, you can easily leave the second hole sealed. Each knockout hole measures 17.0mm in diameter, making it a perfect fit for our M12 Female to RJ45 Female Coupler (IECB-XFR0A). The side panel adds more flexibility with two smaller knockouts for M16 cable glands, which are readily available in most stores, and a larger knockout for an M32 conduit gland. You can remove the knockouts based on your installation needs, making the process straightforward.

---

M12 Coupler

M12 Jack to RJ-45 Jack

---

Our M12 X-Coded female to RJ45 female adapter is made from durable zinc-alloy, featuring a rigid die-cast housing that delivers exceptional shielding against EMI. Its impedance is well controlled to support Cat 6A cabling and maintain 10Gbps/Sec. data rate. The Cat 6A channel performance is verified using a Fluke DSX Cable Analyzer with an M12 test adapter, guaranteeing reliable Industrial Ethernet performance.

---

Field Assembly

Field Assembly Kit

---

Our Field Assembly Kit is designed to house field-assembled RJ45 or M12 plugs, enabling installers to manually create plugs for an IP-68 connection with waterproof female RJ45 or M12 jacks on job sites. This kit is particularly useful when molded house-assembled patch cords are not available. Often, you need to assess your surroundings, determine the appropriate cable length, and then create your own patch cords. Essentially, it serves as a versatile DIY waterproof kit. The cable entrance accommodates diameters ranging from 5mm to 10mm, covering nearly all industrial network cable sizes available on the market.

---

M12 Female 180° to

RJ45 Male Screw-Lock

---

The M12 female connector is made to fit an M12 male plug from another device or cable, while the RJ45 male end connects right to Ethernet network gear. This setup is especially useful for systems like industrial control panels with an M12 male connector. The M12 female connector on this patch cord allows for a straightforward connection to an RJ45 network without needing extra adapters, making it ideal for extending connections or serving as a bridge where an M12 male plug is already part of the setup.

---

M12 Female 90° to

RJ45 Male Screw-Lock

---

This high-performance patch cord features a right-angled M12 X-coded female connector paired with a standard RJ45 male connector, delivering up to 10 Gbps of fast, reliable data transfer. Fully compliant with IEC 61076-2-109 standards, it’s built for industrial-grade Ethernet applications. The 90-degree M12 female connector is designed to prevent cable overbending, making it suitable for those tight, tricky spots where a standard connection just won’t cut it. Ideal for extending or linking systems that already use M12 male connectors, this cord also well connects to Ethernet devices, ensuring consistent, top-tier performance in control panels, industrial machinery, and more.

---

M12 Female 180° to

RJ45 Female Screw-Lock

---

This patch cord features an M12 X-coded female connector on one end and a standard RJ45 jack on the other, providing rapid data transmission speeds up to 10 Gbps/sec., compliant with IEC 61076-2-109. Built for Industrial Ethernet, these cables offer robust performance in control panels and machinery, combining M12 and RJ45 connectors in one cord to remove the need for extra connections.

---

M12 Female 90° to

RJ45 Female Screw-Lock

---

The M12 female connector fits an M12 male plug from another device, while the RJ45 female end connects directly to Ethernet gear, delivering up to 10 Gbps of reliable data transfer in compliance with IEC 61076-2-109 standards. Ideal for control panels and automated machinery, it simplifies connections between M12 and RJ45 without extra adapters. The 90-degree M12 female connector prevents cable overbending, making it suitable for tight spaces where standard connections may not work. This cord ensures reliable performance with Ethernet devices in control panels, industrial machinery, and more.

---